Instrument Panel (IP) - Endcap Replacement - Right

REMOVAL PROCEDURE




1. Insert flat bladed tool between the IP endcap (1) and the IP and pull out on the IP endcap (1) while releasing the retainer (2) with the flat bladed tool.
2. Slide the IP endcap (1) out of the tabs on the front edge of the IP and remove the endcap (1).

INSTALLATION PROCEDURE




1. Align the tabs on the front edge of the right IP end cap (1) to the slots in the IP.
2. Push the IP endcap (1) towards the IP in order to engage the IP endcap retainer (2).