Sunroof / Moonroof: Adjustments

Sunroof Window Height and Opening Fit Adjustment

1. Cycle the sunroof window from the full open to closed position.




2. Loosen the 4 adjusting screws (1).
3. There are 2 adjusting screws on each side of the sunroof window.
4. Center the window front to rear in the opening.

Notice: Refer to Fastener Notice .





5. Adjust the front of the sunroof window (2) from flush to 1 mm (0.04 in) (1) below the top surface of the roof panel (3).

Tighten the front sunroof window adjustment screws to 5 N.m (44 lb in).





6. Adjust the rear of the sunroof window (2) from flush to 1 mm (0.04 in) (1) above the top surface of the roof panel (3).

Tighten the rear sunroof window adjustment screws to 5 N.m (44 lb in).

7. Cycle the sunroof window through all of the positions.
8. Verify the sunroof window fore/aft adjustments.
9. Verify the front and rear height adjustment.
10. Readjust the sunroof window, if necessary.