Scan Tool Data Definitions

Battery Voltage: The scan tool displays 0-16 Volts. The level of battery voltage at the module.

Belt Tower Down (Input): The scan tool displays Inactive/Active. When the belt tower down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Belt Tower Down (Output): The scan tool displays Inactive/Active. When the belt tower down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction

Belt Tower Up (Input): The scan tool displays Inactive/Active. When the belt tower up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Belt Tower Up (Output): The scan tool displays Inactive/Active. When the belt tower up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Belt Tower Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the belt tower position. High scan tool values Volts or A/D) indicate that the belt tower is in the up position and low values indicate that the belt tower is in the down position.

Current: The scan tool displays 0-127.5 Amps. The current measured during seat operation.

Front Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat front vertical position. High scan tool values Volts or A/D) indicate that the seat front is in the up position and low values indicate that the seat front is in the down position.

Heated Seat LED: The scan tool displays Idle/High/Medium/Low or Back-High/Back-Medium/Back-Low. These parameters indicate the mode of operation that has been selected, while the output from the driver door module is illuminating the selected LED.

Heated Seat Mode (Input): The scan tool displays Off/On. When the heated seat Back Only switch is activated, the scan tool will momentarily display the switch input to the door module as On.

Heated Seat Mode (Output): The scan tool displays Off/On. When the heated seat Back Only switch is activated, the scan tool will momentarily display On while the output from the door module signals the heated seat module to deactivate the heat from the seat cushion.

Heated Seat Temperature (Input): The scan tool displays Off/On. When the heated seat temperature switch is first activated, the scan tool will momentarily display the switch input to the door module as On.

Heated Seat Temperature (Output): The scan tool displays Off/On. When the heated seat temperature switch is first activated, the scan tool will momentarily display On, while the output from the door module signals the heated seat module to turn on to the High heat mode. With each additional activation of the switch, the heated seat module will increment through the remaining temperature modes (Med/Low/Off).

Horizontal Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat horizontal position. High scan tool values Volts or A/D) indicate that the seat is in the forward position and low values indicate that the seat is in the rearward position.

Lumbar Horizontal Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the lumbar horizontal position. High scan tool values Volts or A/D) indicate that the Lumbar is in the forward position and low values indicate that the lumbar is in the rearward position.

Lumbar Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the lumbar vertical position. High scan tool values volts or A/D) indicate that the lumbar is in the up position and low values indicate that the lumbar is in the down position.

Memory Recall Switches: The scan tool displays Idle/Memory 1/memory 2/Exit/Set. When a memory function switch is activated, the scan tool will momentarily display the switch input function to the Driver Door Switch Assembly (DDSA) as selected.

Rear Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat rear vertical position. High scan tool values Volts or A/D) indicate that the seat rear vertical is in the up position and low values indicate that the seat rear vertical is in the down position.

Recline Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat recline position. High scan tool values Volts or A/D) indicate that the seat recline is in the forward position and low values indicate that the seat recline is in the rearward position.

Seat Rearward (Input): The scan tool displays Inactive/Active. When the seat horizontal rearward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rearward (Output): The scan tool displays Inactive/Active. When the seat horizontal rearward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Forward (Input): The scan tool displays Inactive/Active. When the seat horizontal forward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Forward (Output): The scan tool displays Inactive/Active. When the seat horizontal forward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Front Down (Input): The scan tool displays Inactive/Active. When the seat front vertical down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Front Down (Output): The scan tool displays Inactive/Active. When the seat front vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Front Up (Input): The scan tool displays Inactive/Active. When the seat front vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Front Up (Output): The scan tool displays Inactive/Active. When the seat front vertical up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Rearward (Input): The scan tool displays Inactive/Active. When the lumbar horizontal rearward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Rearward (Output): The scan tool displays Inactive/Active. When the lumbar horizontal rearward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Down (Input): The scan tool displays Inactive/Active. When the lumbar vertical down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Down (Output): The scan tool displays Inactive/Active. When the lumbar vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Forward (Input): The scan tool displays Inactive/Active. When the lumbar horizontal forward switch is activated, the scan tool will momentarily display switch input to the memory seat module as Active.

Seat Lumbar Forward (Output): The scan tool displays Inactive/Active. When the lumbar horizontal forward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Up (Input): The scan tool displays Inactive/Active. When the lumbar vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Up (Output): The scan tool displays Inactive/Active. When the lumbar vertical up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory module is commanding the motor in a specific direction.

Seat Rear Down (Input): The scan tool displays Inactive/Active. When the seat rear vertical down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rear Down (Output): The scan tool displays Inactive/Active. When the seat rear vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Rear Up (Input): The scan tool displays Inactive/Active. When the seat rear vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rear Up (Output): The scan tool displays Inactive/Active. When the seat rear vertical up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Recline Rearward (Input): The scan tool displays Inactive/Active. When the seat recline rearward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Recline Rearward (Output): The scan tool displays Inactive/Active. When the seat recline rearward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Recline Forward (Input): The scan tool displays Inactive/Active. When the seat recline forward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Recline Forward (Output): The scan tool displays Inactive/Active. When the seat recline forward switch is activated or a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.