Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the cruise control cable.
2. Disconnect the electrical connector from the cruise control module assembly (2).
3. Remove the nuts (3) and the bolt (1) from the cruise control module and the bracket assembly (2).
4. Remove the cruise control module and the bracket assembly (2).
5. Remove the fasteners (3) retaining the cruise control module bracket (4) to the cruise control module (1).
6. Remove the cruise control module (1) from the cruise control module mounting bracket (4).
INSTALLATION PROCEDURE
1. Install the cruise control module (1) on the cruise control mounting bracket (4).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the module to bracket fasteners.
Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).
3. Install the cruise control module assembly (2) to the body.
4. Install the 2 nuts (3) and the bolt (1).
Tighten
Tighten the cruise control module assembly to 9 N.m (80 lb in).
5. Connect the electrical connector to the cruise control module (1).
6. Install the cruise control cable.