DIC Driver Information Center Switches

DSPL MODE
The DSPL MODE button is used in order to change the instrument cluster display.
^ Analog (UY9) - The IPC display has 3 different states.
- IPC gages
- IPC gages and digital speed display
- Digital speed display
^ Digital (U02) - The fuel level and engine coolant temperature displays turn on and off.

ENG/MET
The ENG/MET button is used in order to change the instrument cluster and DIC displays between English and metric units.

INFO (Up and Down)
The INFO button consists of 2 switches:
^ INFO Up - The top of the INFO button is used in order to scroll up to the next DIC display parameter.
^ INFO Down - The bottom of the INFO button is used in order to scroll down to the next DIC display parameter.

INFO RESET
The INFO RESET button is used in order to acknowledge the currently displayed DIC message or reset the currently displayed DIC parameter.

ON/OFF
The ON/OFF button is used for the following functions:
^ Feature Programming - Turn the currently displayed parameter on and off.
^ Timer - Start and stop the timer.

TRIP (RESET and A/B)
The TRIP button consists of 2 switches:
^ TRIP RESET - The top of the TRIP button is used in order to reset the displayed trip odometer to zero.
^ TRIP A/B - The bottom of the TRIP button is used in order to change the trip odometer between trip A and trip B.

"For the description of RPO code(s) shown in this article or any of the images therein, refer to the RPO code list found at the Vehicle/Application And ID." RPO Codes