Theft System

SECURITY
The IPC illuminates the SECURITY indicator as determined by the Vehicle Theft Deterrent (VTD) system and the Content Theft Deterrent (CTD) system. The IPC receives a class 2 message from the theft deterrent controller module or the Rear Integration Module (RIM) requesting illumination.
^ The VTD system requests the IPC to illuminate the indicator only when the ignition switch is ON. The VTD system uses the indicator as a malfunction indicator.
^ The CTD system requests the IPC to illuminate the indicator only when the ignition switch is OFF. The CTD system uses the indicator in order to identify system status.
^ The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.

SERVICE THEFT SYSTEM - 34
The IPC illuminates the SERVICE THEFT SYSTEM - 34 indicator in the DIC when the theft deterrent module sets an DTC. The IPC receives a class 2 message from the theft deterrent module requesting illumination.

STARTING DISABLED/REMOVE KEY - 33
The IPC illuminates the STARTING DISABLED/REMOVE KEY - 33 indicator in the DIC when the theft deterrent system has disabled the starting system. The IPC receives a class 2 message from the theft deterrent module requesting illumination.

THEFT ATTEMPTED - 40
The IPC illuminates the THEFT ATTEMPTED - 40 indicator in the DIC when the theft deterrent system has detected a theft attempt. The IPC receives a class 2 message from the Rear Integration Module (RIM) requesting illumination.