Fog/Driving Lamp Bulb: Service and Repair
FOG LAMP BULB REPLACEMENT - FRONTREMOVAL PROCEDURE
CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
^ Turn off the lamp switch and allow the bulb to cool before changing the bulb.
^ Leave the lamp switch OFF until the bulb change is complete.
^ Always wear eye protection when changing a halogen bulb.
^ Handle the bulb only by its base. Avoid touching the glass.
^ Keep dirt and moisture off the bulb.
^ Properly dispose of the used bulb.
^ Keep halogen bulbs out of the reach of children.
1. Remove the front air deflector.
2. Disconnect the electrical connector.
3. Remove the bulb from the fog lamp assembly by twisting the bulb counterclockwise and pulling the bulb out.
INSTALLATION PROCEDURE
CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
^ Turn off the lamp switch and allow the bulb to cool before changing the bulb.
^ Leave the lamp switch OFF until the bulb change is complete.
^ Always wear eye protection when changing a halogen bulb.
^ Handle the bulb only by its base. Avoid touching the glass.
^ Keep dirt and moisture off the bulb.
^ Properly dispose of the used bulb.
^ Keep halogen bulbs out of the reach of children.
1. Install the bulb to the fog lamp assembly by inserting the bulb and twisting the bulb clockwise.
2. Connect the electrical connector.
3. Install the front air deflector.