Theft Deterrent Control Module

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the SIR system. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle.
3. Disconnect the theft deterrent module electrical connector.
4. Remove the tie straps from the theft deterrent module wiring harness.
5. Remove the theft deterrent module.

Installation Procedure





1. Install the theft deterrent module to the lock module.
2. Connect the theft deterrent module electrical connector.
3. Install new tie straps to secure the wiring harness.
4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle.
5. Enable the SIR system. Refer to Enabling the SIR System in Restraint Systems.