Trunk Lamp: Service and Repair

REAR COMPARTMENT LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Using a small flat-bladed tool, gently push inward and pry downward on the right end of the lamp in order to remove the lamp from the opening.
2. Pull downward and to the right in order to remove.
3. Remove the rear compartment lamp.
4. Disconnect the electrical connector.
5. Pull the bulb from the lamp socket (if replacing).

INSTALLATION PROCEDURE




1. Install the bulb into the lamp socket.
2. Connect the electrical connector.
3. Position the lamp to the left side of the opening.
4. Position the right side of the rear compartment lamp into the opening.
5. Gently press the lamp upward into place ensuring the lamp is fully seated.