Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Disconnect the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor electrical connector (1).
2. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.
NOTE: Refer to MAF and Screen Notice in Service Precautions.
3. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct.
INSTALLATION PROCEDURE
NOTE: Refer to MAF and Screen Notice in Service Precautions.
1. Carefully install the MAF/IAT sensor (1) into the air cleaner and intake air duct.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.
Tighten
Tighten the clamps to 3 N.m (27 lb in).
3. Reconnect the MAF/IAT sensor electrical connector (1).