Linkage Replacement - Door

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove water deflector.
3. Remove the lock rod shield (2), as needed.
4. Remove the rods from the inside remote handle/lock button assembly.
5. Remove the rods from the lock assembly (1).
6. Disengage the rods from the anti-rattle clips.
7. Remove the rods.

INSTALLATION PROCEDURE




1. Install the rods to the lock assembly (1).
2. Install the rods to the inside remote handle/lock button assembly.
3. Install the lock rod shield (2).
4 Ensure the rods are firmly seated into the anti-rattle clips.
5. Install water deflector.
6. Install the door trim panel.