Lock Cylinder Replacement - Door

REMOVAL PROCEDURE

CAUTION: Refer to Express Window Down Caution in Service Precautions.




1. Ensure that the window is in the full-up position.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the outside door handle.
5. Remove the nut (4) retaining the lock cylinder to the handle (1).
6. Remove the lock cylinder (5) from the door handle (1).

INSTALLATION PROCEDURE




1. Install the lock cylinder (5) onto the door handle (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut (4) in order to retain the lock cylinder (5) to the handle (1).

Tighten
Tighten the fastener to 9 N.m (80 lb in).

3. Install the outside door handle.
4. Install the water deflector.
5. Install the trim panel.