Radiator Support Sight Shield Replacement

Radiator Support Sight Shield Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure




1. Open the hood.
2. Remove both front filler panels. Refer to Filler Panel Replacement - Upper (Service and Repair).
3. Using the J 38778 remove the push-in retainers (1) from the sight shield (2).
4. Remove the radiator support sight shield (2).


Installation Procedure




1. Position the sight shield (2) to the radiator support.
2. Install new push-in retainers (1) in order to retain the radiator support sight shield (2).
3. Install both upper filler panels. Refer to Filler Panel Replacement - Upper (Service and Repair).
4. Close the hood.