Theft System

PROGRAM PASS KEY - 31
The IPC illuminates the PROGRAM PASS KEY - 31 indicator in the DIC when the IPC detects the ignition key pellet information has not been programed.

SECURITY
The Vehicle Theft Deterrent (VTD) system utilizes the IPC to control the VTD functions. The IPC illuminates the SECURITY indicator when it detects a malfunction with the VTD system. The Content Theft Deterrent (CTD) system utilizes the body control module (PZM) to control the VTD functions. The IPC receives a class 2 message from the PZM requesting illumination.
^ The VTD system requests the IPC to illuminate the indicator only when the ignition switch is ON. The VTD system uses the indicator as a malfunction indicator.
^ The CTD system requests the IPC to illuminate the indicator only when the ignition switch is OFF. The CTD system uses the indicator in order to identify system status.
^ The IPC performs the displays test at the start of each ignition cycle The indicator illuminates for approximately 3 seconds.

STARTING DISABLED REMOVE KEY - 33
The IPC illuminates the STARTING DISABLED/REMOVE KEY - 33 indicator in the DIC when the Powertrain Control Module (PCM) has not received a fuel enable signal from the IPC prior to an attempted vehicle start. The IPC receives a class 2 message from the PCM requesting illumination. After the ignition is cycled to OFF the IPC illuminates WAIT 3 MINUTES, WAIT 2 MINUETS, WAIT 1 MINUTE and than START CAR, REMOVE KEY in the DIC.

THEFT SYSTEM PROBLEM CAR MAY NOT RESTART - 34
The IPC illuminates the THEFT SYSTEM PROBLEM CAR MAY NOT RESTART - 34 indicator in the DIC when the IPC detects a theft system malfunction well the engine is running. The vehicle will continue to run but may not restart if the malfunction is still present when engine is turned OFF.