Backup Lamp: Service and Repair

BACKUP LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Remove the license plate pocket.
2. Remove the screws which retain the backup lamp to the license plate pocket.




3. Remove the backup lamp assembly from the license plate pocket.

INSTALLATION PROCEDURE




1. Position the backup lamp assembly to the license plate pocket.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the screws which retain the backup lamp to the license plate pocket.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the license plate pocket.