Courtesy Lamp: Service and Repair
COURTESY LAMP REPLACEMENT - REAR QUARTERREMOVAL PROCEDURE
1. Pull the garment hook downward in order to access the fastener.
2. Remove the fastener (2).
3. Using a flat-bladed tool, pry downward on the lamp (3).
4. Disconnect the electrical connector (3).
5. Remove the courtesy lamp.
INSTALLATION PROCEDURE
1. Connect the electrical connector (3).
2. Install the rear courtesy lamp (3).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the fastener (2).
Tighten
Tighten the fastener to 2 N.m (18 lb in).
4. Reposition the garment hook.