Inflatable Restraint Instrument Panel Module Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.




1. Disable the SIR system.
2. Remove the upper trim panel.
3. Remove all the inflatable restraint IP module fasteners (2).
4. Remove the inflatable restraint IP module (1).

INSTALLATION PROCEDURE




1. Install the inflatable restraint IP module (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the inflatable restraint IP module mounting fasteners (2).

Tighten
Tighten fasteners to 2 N.m (18 lb in).

3. Install the IP upper trim pad.
4. Enable the SIR system.