Crankshaft, Engine

Crankshaft	Journals Crankshaft (Main), Diameter	2.5335 - 21.5341 Inch (in)
	Runout #1, #5	0.0009 Inch (in)
	Runout #2, #3, #4	0.0010 Inch (in)
	Round	0.0002 Inch (in)
	Taper	0.0002 Inch (in)
	Width, #1, #2, #4, #5	0.9661 - 0.9709 in
	Thrust #3, Wall Width	0.9902 - 0.9941 Inch (in)
	Runout	0.0016 Inch (in)
	Square	0.0004 in
	Crankpin (Connecting Rod), Diameter	2.1239 - 2.1245 in
	Round	0.0002 Inch (in)
	Taper	0.0002 in
	Width	1.7260 - 1,7307 in
	End Play, Production	0.0020 - 0.0197 Inch (in)
	Service - Maximum	0.0197 in
	Flange (Engine Flywheel), Face Runout	0.0010 in
	Rear Seal, Diameter	3.7748 - 3.7787 in
	Runout	0.0010 Inch (in)
	Nose Diameter, 0.0 - 21.0 mm (0.000 - 0.827 inch) (From Front Face)	1.3583 - 1.3681 in
	Runout	0.0039 Inch (in)
	21.0 - 53.00 mm (0.827 - 2.087 inch) (From Front Face)	1.3737 - 1.3745
	Runout	0.0012 Inch (in)
	53.00 mm (2.087 inch) (From Front Face) to Rolled Fillet	1.3169 - 1.3209
	Runout	0.0039 Inch (in)
	89.94 - 110.54 mm (3.541 - 4.352 inch) (From Front Face)	1.7697 - 1.7717
	Runout	0.0010 Inch (in)
Crankshaft Balancer	Hub Inside Diameter	1.3719 - 1.3726 Inch (in)
	Outside Diameter (Without Wear Sleeve	1.9972 - 2.0028 in
	Runout	0.0039 in