Battery: Service and Repair
BATTERY REPLACEMENTREMOVAL PROCEDURE
1. Remove the right front gusset.
2. Disconnect the battery negative cable.
3. Disconnect the positive battery cable from the battery.
4. Remove the battery retainer bolt and battery retainer.
5. Remove the battery from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery into the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the battery retainer and bolt.
Tighten
Tighten the battery retainer bolt to 17 N.m (13 lb ft).
3. Connect the positive battery cable to the battery.
Tighten
Tighten the battery cable bolt to 17 N.m (13 lb ft).
4. Connect the battery negative cable.
5. Install the right front gusset.