Turn Signal Cancel Cam & Upper Bearing Inner Race - Assemble

Turn Signal Cancel Cam and Upper Bearing Inner Race-Assemble-Off Vehicle

- Tools Required
- J23653-SIR Lock Plate Compressor





1. Lubricate the inner race (2) with synthetic grease.
2. Install the inner race (2).
3. Install the upper bearing inner race seat (1).





4. Install the upper bearing spring (3).
5. Lubricate the turn signal cancel cam assembly (2) with grease kit 26001884.
6. Install the turn signal cancel cam assembly (2).
7. Install the shaft lock (1).





8. Install the wave washer.





9. Install the new bearing retainer (1) using J23653-SIR.
10. Install the inflatable restraint steering wheel module coil.