Turn Signal Cancel Cam & Upper Bearing Inner Race - Disassemble

Turn Signal Cancel Cam and Upper Bearing Inner Race-Disassemble-Off Vehicle

- Tools Required
- J23653-SIR Lock Plate Compressor

1. Remove the inflatable restraint steering wheel module coil.





2. Remove the wave washer.





3. Compress the shaft lock using J23653-SIR.
4. Remove and discard the bearing retainer (1) using J23653-SIR.
5. Remove J23653-SIR from the steering shaft assembly.





6. Remove the shaft lock (1).
7. Remove the turn signal cancel cam assembly (2).
8. Remove the upper bearing spring (3).





9. Remove the upper bearing inner race seat (1).
10. Remove the inner race (2).