Rear

Stabilizer Shaft Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the stabilizer shaft links.
4. Remove the stabilizer shaft bracket bolts.





5. Remove the stabilizer shaft brackets.
6. Remove the stabilizer shaft insulators from the stabilizer shaft.
7. Support the exhaust system.
8. Remove the exhaust system hangers and lower the exhaust system.
9. Lower and support the exhaust system at the rear.
10. Remove the stabilizer shaft from the vehicle.

Installation Procedure





1. Install the stabilizer shaft to the vehicle.
2. Raise the exhaust system back into place.
3. Install the stabilizer shaft insulators to the stabilizer shaft.
4. Install the stabilizer shaft brackets.
5. Install the stabilizer shaft bracket bolts.

Notice Refer to Fastener Notice in Service Precautions.

6. Tighten the stabilizer shaft bracket bolts.
- Tighten the stabilizer shaft bracket bolts 60 Nm (44 ft. lbs.).
7. Install the stabilizer shaft links.
8. Install the tire and wheel.
9. Lower the vehicle.