Steps 79 - 93

79. Attach the secondary AIR relay (1) to the relay bracket.
80. Install the air cleaner assembly.
81. Install the upper filler panel.





82. Connect the hose (4) to the evaporative emission canister purge valve (3).
83. Connect the fuel inlet and return quick-connect fittings at the fuel rail.





84. Connect the vacuum brake booster hose to the vacuum connection.





85. Position the intake manifold sight shield (1) to the engine.
86. Install the two intake manifold sight shield nuts (2).
Tighten the intake manifold sight shield nuts to 3 Nm (27 inch lbs.).
87. Connect the battery negative cable.
88. Fill the engine with oil.
89. Fill the cooling system.
90. Bleed the hydraulic brake system.
91. Recharge the A/C refrigerant system.
92. Bleed the power steering system.
93. Measure the wheel alignment.