Horn: Service and Repair
HORN REPLACEMENTREMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the lower air deflector.
3. Disconnect the electrical connectors (1) from the horns (2).
4. Remove the fasteners securing the horns (1) to the body.
5. Remove the horns (1) from the body.
INSTALLATION PROCEDURE
1. Note the orientation of the horn bracket, relative to the horn trumpet.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the replacement horn to the original bracket or the replacement bracket supplied with the kit. Ensure the orientation of the horn trumpet to the mounting bracket is correct
Tighten
Tighten the horn to the mounting bracket fastener to 10 N.m (90 lb in).
3. Install the horns (1) to the body, using the original bracket to body mounting fastener.
4. Install the fasteners in order to secure the horns (1) to the body.
Tighten
Tighten the fasteners to 15 N.m (11 lb ft).
5. Connect the horn electrical connectors (1) to the horns (2).
6. Install the front air deflector.
7. Lower the vehicle.