Marker Lamp: Service and Repair
MARKER LAMP REPLACEMENT - SIDEREMOVAL PROCEDURE
1. Remove the headlamp assembly from the vehicle. Refer to Headlamp Replacement (SLS, W/O TT6, T77 or TT8) or Headlamp Replacement (STS and SLS with TT6, TT7 or TT8).
2. Disconnect the the electrical connector from the sidemarker bulb.
3. Depress the tang on the side marker lamp socket (1) and rotate it counter clockwise in order to release it from the headlamp assembly (2).
4. Remove the side marker bulb (1) from the headlamp assembly (2).
INSTALLATION PROCEDURE
1. Install the side marker bulb (1) into the headlamp assembly (2).
2. Turn the side marker lamp socket (1) clockwise in order to secure it to the headlamp assembly (2).
3. Connect the electrical connector to the side marker lamp socket (1).
4. Install the headlamp assembly to the vehicle. Refer to Headlamp Replacement (SLS, W/O TT6, TT7 or TT8) or Headlamp Replacement (STS and SLS with TT6, TT7 or TT8).
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes