Set Up the DIM for Cellular Telephone UV8

Verify that the dash integration module (DIM) is set up to recognize the UV8 cellular telephone option. This procedure is necessary to ensure that the vehicle steering wheel controls perform cellular telephone functions in place of the HVAC functions. The procedure is also necessary to enable the driver information center cellular telephone messages. (For complete instructions for DIM programming and setup, refer to BCM Programming/RPO Configuration (DIM) or BCM Programming/RPO Configuration (IPM) or BCM Programming/RPO Configuration (RIM) in Body Control Module System.)
1. Connect a scan tool to the data link connector (DLC).
2. Turn ON the ignition, with the engine off.
3. Under the dash integration (DIM) main menu, select Special Functions.
4. Under the Special Functions menu, select Set Options.
5. Under the Set Options menu, select Miscellaneous Options #1.
6. Under Miscellaneous Options #1, select Phone. Save the selected option.
7. Exit the scan tool DIM menu.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes