Turning RDS On

The RDS select button is located in the lower right hand corner of the radio face. Press the RDS select button to use the alternate RDS functions on the six preset buttons. After pressing the RDS select button, press the RDS (preset 1) button to turn RDS on or off. When tuned to a non-RDS station, your radio will display frequency information as you would normally expect. When tuned to an RDS station, your radio will change from displaying the frequency of the FM station to displaying the call letters of the station or display the nickname of the station. This feature is known as the Program Service Name.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes