Radio Replacement (With RPO Code UY4)

REMOVAL PROCEDURE




1. Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
2. Remove the fasteners (4) retaining the radio (5) to the radio / navigation processor bracket.
3. Disconnect the electrical connectors (1,3) and the antenna (2) from the radio (5).
4. Remove the radio (5) from the radio / navigation processor bracket.

INSTALLATION PROCEDURE




1. Install the radio (5) to the radio / navigation processor bracket.
2. Reconnect the antenna (2) and the electrical connectors (1,3) to the radio (5).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the fasteners (4) that retain the radio (5) to the radio / navigation processor bracket.

Tighten
Torque the radio fasteners to 5 N.m (44 lb in).

4. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.