Trunk / Liftgate Striker: Service and Repair

Rear Compartment Lid Latch Striker Replacement

Removal Procedure

1. Open the rear compartment lid.
2. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Service and Repair).




3. Remove the fasteners (2) securing the rear compartment latch striker (1) to the vehicle.
4. Remove the rear compartment latch striker (1) from the vehicle.



Installation Procedure





1. Install the rear compartment latch striker (1) to the vehicle.
2. Install the fasteners (2) in order to secure the rear compartment latch striker (1) to the vehicle.
3. Carefully close the rear compartment lid.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Hold the rear compartment lid at correct height and tighten the fasteners (2) in order to secure the rear compartment latch striker (1) to the vehicle.

Tighten the fasteners to 12 N.m (9 lb ft).

5. Open the rear compartment lid.
6. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Service and Repair).
7. Close the rear compartment lid.