Scan Tool Data Definitions

Battery Voltage: The scan tool displays 0-16 Volts. The level of voltage from the module's battery positive circuit to the module's ground circuit.

Current: The scan tool displays 0-127.5 Amps. The amount of current measured during selected seat operation.

Dr. Rear Heated Seats: The scan tool displays Off/High/Low. When the LH rear heated seat switch is activated, the scan tool will display the output from the RIM to the LH rear heated seat module as selected High or Low.

Front Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat front vertical position. High scan tool values (Volts or A/D) indicate that the seat front is in the up position and low values indicate that the seat front is in the down position.

Headrest Down (Input): The scan tool displays Inactive/Active. When the headrest down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Headrest Down (Output): The scan tool displays Inactive/Active. When the headrest down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Headrest Up (Input): The scan tool displays Inactive/Active. When the headrest up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Headrest Up (Output): The scan tool displays Inactive/Active. When the headrest up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Headrest Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the headrest position. High scan tool values (Volts or A/D) indicate that the headrest is in the up position and low values indicate that the headrest is in the down position.

Heated Seats Inhibit: The scan tool displays Off/ Inhibit. When a load shed signal is received by the rear integration module (RIM) from the driver information module (DIM), the output of the RIM will display Inhibit.

Heated Seats Status: The scan tool displays On/Off. When a heated seat function is on, the scan tool will display the status input from the heated seat module as On.

Horizontal Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat horizontal position. High scan tool (values Volts or A/D) indicate that the seat is in the forward position and low values indicate that the seat is in the rearward position.

Left Rear Heated Seat: The scan tool displays Off/On. When the LH rear heated seat switch is activated, the scan tool will display the switch input as On, via a class 2 message from the LH rear door module.

Load Shed Lvl. 1 Heated Seats: The Scan tool displays Enable/Disabled. During a predetermined heavy loading condition, the driver information module (DIM) will send out a class 2 message to the rear integration module (RIM) that a load shed level 1 is in effect, and the scan tool will display Enable.

Load Shed Lvl. 2 Heated Seats: The scan tool displays Enable/Disabled. During heavy loading conditions, the driver information module (DIM) will send out a class 2 message to the rear integration module (RIM) that a load shed level 2 is in effect, and the scan tool will display Enable.

Lumbar Horizontal Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the lumbar horizontal position. High scan tool values (Volts or A/D) indicate that the Lumbar is in the forward position and low values indicate that the lumbar is in the rearward position.

Lumbar Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the lumbar vertical position. High scan tool values (Volts or A/D) indicate that the lumbar is in the up position and low values indicate that the lumbar is in the down position.

Memory Recall Switches: The scan tool displays Idle/Memory 1/memory 2/Exit/Set. When a memory function switch is activated, the scan tool will momentarily display the switch input to the driver door module as selected.

Pass. Rear Heated Seats: The scan tool displays Off/High/Low. When the RH rear heated seat switch is activated, the scan tool will display the output from the RIM to the RH rear heated seat module as selected High or Low.

Rear Vertical Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat rear vertical position. High scan tool values (Volts or A/D) indicate that the seat rear vertical is in the up position and low values indicate that the seat rear vertical is in the down position.

Recline Sensor: The scan tool displays 0-5.0 Volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the seat recline position. High scan tool values (Volts or A/D) indicate that the seat recline is in the forward position and low values indicate that the seat recline is in the rearward position.

Right Rear Heated Seat: The scan tool displays Off/On. When the RH rear heated seat switch is activated, the scan tool will display the switch input as On, via a class 2 message from the RH rear door module.

Seat Rearward (Input): The scan tool displays Inactive/Active. When the seat horizontal back switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rearward (Output): The scan tool displays Inactive/Active. When the seat horizontal back switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Forward (Input): The scan tool displays Inactive/Active. When the seat horizontal forward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Forward (Output): The scan tool displays Inactive/Active. When the seat horizontal forward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Front Down (Input): The scan tool displays Inactive/Active. When the seat front vertical down switch is activated the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Front Down (Output): The scan tool displays Inactive/Active. When the seat front vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Front Up (Input): The scan tool displays Inactive/Active. When the seat front vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Front Up (Output): The scan tool displays Inactive/Active. When the seat front vertical up switch is activated Or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Rearward (Input): The scan tool displays Inactive/Active. When the lumbar horizontal back switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Rearward (Output): The scan tool displays Inactive/Active. When the lumbar horizontal back switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Down (Input): The scan tool displays Inactive/Active. When the lumbar vertical down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Down (Output): The scan tool displays Inactive/Active. When the lumbar vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Forward (Input): The scan tool displays Inactive/Active. When the lumbar horizontal forward switch is activated, the scan tool momentarily displays the switch input to the memory seat module as Active.

Seat Lumbar Forward (Output): The scan tool displays Inactive/Active. When the lumbar horizontal forward switch is activated or when a memory recall occurs, the scan tool momentarily displays Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Lumbar Up (Input): The scan tool displays Inactive/Active. When the lumbar vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Lumbar Up (Output): The scan tool displays Inactive/Active. When the lumbar vertical up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Rear Down (Input): The scan tool displays Inactive/Active. When the seat rear vertical down switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rear Down (Output): The scan tool displays Inactive/Active. When the seat rear vertical down switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Rear Up (Input): The scan tool displays Inactive/Active. When the seat rear vertical up switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Rear Up (Output): The scan tool displays Inactive/Active. When the seat rear vertical up switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from memory seat module is commanding the motor in a specific direction.

Seat Recline Rearward (Input): The scan tool displays Inactive/Active. When the seat recline rearward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Recline Rearward (Output): The scan tool displays Inactive/Active. When the seat recline rearward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.

Seat Recline Forward (Input): The scan tool displays Inactive/Active. When the seat recline forward switch is activated, the scan tool will momentarily display the switch input to the memory seat module as Active.

Seat Recline Forward (Output): The scan tool displays Inactive/Active. When the seat recline forward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the memory seat module is commanding the motor in a specific direction.