Steps 77 - 88

77. Remove the bolt (2) securing the rear transaxle brace (1) to the transaxle.
78. Remove the nuts (3) securing the rear transaxle brace (1) to the stud located on the right cylinder head.
79. Remove the rear transaxle brace (1).





80. Remove the bolts (1, 3) securing the front transaxle brace (2) to the transaxle and right cylinder head.





81. Remove the nuts (2, 3) securing the vehicle speed sensor heat shield (1) to the transaxle,





82. Remove the bolts securing the center transaxle brace to the engine and transaxle.





83. Install the J 42504 to the cylinder head.
84. Install a engine lift chain to the engine lift brackets and attach to an engine lift devise.





85. Remove the nut securing the front engine mount to the engine frame.





86. Remove the bolts attaching the engine to the transaxle.
87. Raise the engine from the supported frame and transaxle assembly.
88. Remove the front engine mount bracket.