Vehicle Information Display

The vehicle information display parameters are available to the driver during the RUN power mode. The driver navigates through the various parameters displayed on the Driver Information Center (DIC) using the INFO Up and INFO Down DIC buttons. Some parameters can be reset using the INFO RESET button.

Some parameters require information from other modules via class 2 serial data messages. If the Instrument Cluster (IPC) has not received data for a parameter when the time has come to display the parameter, the IPC will blank the data on the DIC. If the IPC has determined that a class 2 communication failure with one of the modules exists when the time has come to display the parameter, the IPC will display dashes on the DIC.

The vehicle information display parameters are displayed in the following order:
1. Outside air temperature
2. Fuel range
3. Average fuel economy
4. Instantaneous fuel economy
5. Fuel used
6. Average Vehicle speed
7. Timer
8. Battery Voltage
9. Tire Pressure Monitor (W/UJ6)
10. Engine oil life
11. Transmission fluid life
12. Cellular Telephone (W/UV8)
13. Feature Programming
14. Blank display

When the INFO Up button is pressed, the DIC will display the next parameter on the list. When the INFO Down button is pressed, the DIC will display the previous parameter on the list.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes