Inlet

Radiator Hose Replacement - Inlet

^ Tools Required
- J 37097-A Hose Clamp Remover/installer
- J 38185 Hose Clamp Pliers Remove Procedure

Removal Procedure

1. Partially drain the cooling system.
2. Remove the upper filler panel.





3. Position the J 38185 (2) to the clamp in order to remove the inlet radiator hose (1) from the water housing crossover.





4. Position the J 37097-A to the clamp in order to remove the inlet radiator hose from the radiator.
5. Remove the inlet radiator hose from the vehicle.

Installation Procedure





1. Position the J 37097-A to the clamp in order to connect the inlet radiator hose to the radiator.





2. Position the J 38185 (2) to the clamp in order to connect the inlet radiator hose (1) to the water housing crossover.
3. Install the upper filler panel.
4. Fill the cooling system.