Rear Seat Heater Switch Replacement

Rear Seat Heater Switch Replacement

Removal Procedure

1. Remove the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement (Service and Repair) in Doors.




2. Disconnect the electrical connector (2) from the rear heated seat switch (3).
3. Remove the two heated seat switch fasteners (1).
4. Remove the rear heated seat switch (2) from the door panel.



Installation Procedure





1. Install the rear heated seat switch (2) to the door panel.

Notice: Refer to Fastener Notice.

2. Install the two fasteners (1).

Tighten the fasteners fully driven, seated, but not stripped.

3. Install the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement (Service and Repair) in Doors.