Window Run Channel Replacement - Front Door
REMOVAL PROCEDURE1. Run the window to the full-down position.
2. Remove the door trim panel.
3. Remove the door window inner belt molding.
4. Pull the window run channel (1) from the door window reveal molding.
INSTALLATION PROCEDURE
1. Install the front and rear legs of the window run channel (1) through the belt line.
2. Insert the window run into the reveal molding.
3. Seat the window run starting at the top corner of the center pillar.
4. Working forward and down, seat the rest of the window run into the reveal molding.
5. Install the door window inner belt molding.
6. Install the door trim panel.