Washers Inoperative - Headlamp

TEST DESCRIPTION

Steps 1-9:

Steps 10-15:

The number(s) below refer to the step number(s) on the diagnostic table.
3. Tests the operation of the headlamp washer module and circuits. If the test lamp illuminates for a few seconds the headlamp washer pump is faulty.
4. Tests the battery positive voltage supply circuit to the headlamp washer module.
5. Tests the windshield washer pump control circuit from the wiper motor to the headlamp washer module.
6. Tests the ability of the dash integration module to energize the headlamp washer module.