Door Replacement - Console Compartment

Door Replacement - Console Compartment

Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.





1. Remove the auxiliary HVAC control from the center console. Refer to HVAC Control Module Replacement - Auxiliary in HVAC Automatic.
2. Remove the upper screws (1).
3. Remove the lower screws (2).
4. Remove the center console rear cover (3).




5. Open the console compartment door.
6. Use a flat bladed tool in order to remove the inner auxiliary HVAC outlet (2).
7. Remove the cellular telephone, if equipped with UV8. Refer to Cellular Telephone Docking Station Replacement (DTS) Cellular Telephone Docking Station Replacement (DeVille and DHS) in Cellular Communications.
8. Remove the screws (1) from the console door hinge.
9. Remove the console door and hinge assembly from the center console.



Installation Procedure





1. Align the console lid and hinge assembly to the center console.
The console hinge has alignment pins next to the top hinge screws.

Notice: Refer toFastener Notice in Cautions and Notices.

2. Install the hinge screws (1).

Tighten the screws to 1.6 N.m (14 lb in).

3. Install the cellular telephone storage tray, if equipped with UV8. Refer to Cellular Telephone Docking Station Replacement (DTS) Cellular Telephone Docking Station Replacement (DeVille and DHS) in Cellular Communications.
4. Install the inner auxiliary HVAC outlet (2).
5. Close the console compartment door.




6. Install the center console rear cover (3).
7. Install the rear cover screws (1, 2).

Tighten the screws to 1.6 N.m (14 lb in).

8. Install the auxiliary HVAC control. Refer to HVAC Control Module Replacement - Auxiliary in HVAC Automatic.