Cupholder Replacement - Front Seat

Cupholder Replacement - Front Seat

Removal Procedure

1. Remove the front center seat assembly. Refer toSeat Replacement - Center (w/o UV8) (Seat Replacement - Center (Without RPO Code UV8))Seat Replacement - Center (UV8) (Seat Replacement - Center (With RPO Code UV8)) .
2. Turn center seat over in order to expose the bottom of the center seat assembly.




3. Remove the three fasteners (1) from the cupholder assembly.
4. Turn the center seat over in order to access the cupholder lid.




5. The center seat cupholder (1) has three clips holding it in place after the three fasteners are removed. A sharp tug on the cupholder (1) will release the clips.
Remove the center seat cupholder (1) from the center seat assembly.



Installation Procedure





1. Install the center seat cupholder (1) to the center seat.
Push the cupholder (1) firmly into position in order to engage the cupholder retainer clips.




2. Turn the center seat over in order to expose the bottom of the center seat.

Notice: Refer toFastener Notice in Cautions and Notices.

3. Install the three center seat cupholder fasteners (1).

Tighten the fasteners (1) to 1.5 N.m (13 lb in).

4. Install the center seat assembly. Refer toSeat Replacement - Center (w/o UV8) (Seat Replacement - Center (Without RPO Code UV8))Seat Replacement - Center (UV8) (Seat Replacement - Center (With RPO Code UV8)) .