67. Oil Pan Clean and Inspect
Oil Pan Cleaning and InspectionCleaning Procedure
1. Clean the oil pan in solvent.
Caution: Refer to Safety Glasses Caution in Service Precautions.
2. Dry the oil pan with compressed air.
Inspection Procedure
1. Inspect the exterior of the oil pan for the following conditions:
^ The drain plug hole for damaged threads (1)
^ Damage to the engine mount bracket mounting holes (4)
^ The oil level switch (3) hole for damaged threads
^ Dents or damage to the exterior of the oil pan (2)
^ An oil pan that is dented may interfere with the position of the oil pump screen or not distribute oil properly in the pan sump area.
^ Damage to the oil pan gasket
2. Inspect the interior of the oil pan for the following conditions:
^ Gouges or damage to the oil pan sealing surfaces (1)
^ Damage to the oil pan baffle (2)
^ Damage to the oil pan bolt holes (3)
3. Repair or replace the oil pan as necessary.