Sunload Sensor

The sunload sensor assembly houses both the driver and passenger side sensors. The sunload sensor assembly provides the HVAC control module (IPM) software with the amount of sun light entering the driver and passenger side through the windshield. A 5-volt reference signal is sent from the HVAC control module to the sunload sensor over the driver or passenger solar sensor input circuit. A variable photo-diode resistor inside the sensor varies the voltage. That varied voltage provides a separate driver and passenger signal to the software inside the IPM. The sensor also provides an average reading on the ambient light sensor signal circuit to the IPM for the twilight sentinel feature. The low reference provides ground to the sensor.