Rack and Pinion Boot Replacement - On Vehicle

Rack and Pinion Boot Replacement - On Vehicle

^ Tools Required
- J 22610 Keystone Clamp Pliers

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the outer tie rod.
4. Remove the hex jam nut (2) from the inner tie rod assembly.





5. Remove the tie rod end clamp (2) from the rack and pinion boot (1).
6. Remove the rack and pinion boot clamp from the rack and pinion boot.





7. Remove the rack and pinion boot from the rack and pinion gear assembly.

Installation Procedure





1. Install the rack and pinion boot (3) to the rack and pinion gear assembly.
2. Install a new rack and pinion boot clamp.
3. Using J 22610, crimp the rack and pinion boot clamp.





4. Install the tie rod end clamp (2) from the pinion boot (1).





5. Install the hex jam nut (2) to the inner tie rod assembly.
6. Install the outer tie rod.
7. Install the tire and wheel.
8. Lower the Vehicle. Refer to Vehicle Lifting.
9. Adjust front toe.