Antenna Module Replacement

REMOVAL PROCEDURE




1. Remove the left rear sail panel.
2. Remove the rear assist handles.
3. Disconnect the electrical connectors (2) and the coaxial cable (4, 5) from the AM/FM antenna module (1).
4. Remove the fastener (3) retaining the AM/FM antenna module to the roof beam.
5. Remove the AM/FM antenna module (1).

INSTALLATION PROCEDURE




1. Install the AM/FM antenna module (1) to the roof beam, ensuring that the alignment tab is properly located.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install AM/FM antenna module retaining fastener (3).

Tighten
Tighten the antenna module fastener (3) to 6 N.m (53 lb in).

3. Connect the electrical connectors (2) and the coaxial cables (4, 5) to the AM/FM antenna module (1).
4. Install the rear assist handles.
5. Install the left rear sail panel.