Rear Compartment Lid Ajar Switch

The CTD system uses the rear compartment lid ajar switch in the rear compartment lid latch assembly as one method to activate the alarm. The RIM monitors the rear compartment lid ajar switch via a discrete input. When the rear compartment lid is opened the ajar switch grounds the input to the RIM. When the CTD system is in the armed mode, the RIM activates the alarm.

IMPORTANT: The CTD system can be armed with the windows or sunroof open.

Inputs
The RIM monitors the following inputs:
^ Driver and passenger door jamb switches, class 2 message from the Driver Door Module.
^ Driver and passenger power door lock/unlock switches, class 2 message from the Driver Door Module.
^ Door lock cylinder disarm switch, class 2 message from the Driver Door Module.
^ Transmitter LOCK/UNLOCK buttons, class 2 message from the Remote Control Door Lock Receiver (RCDLR)
^ Rear compartment lid ajar switch.

Outputs
The RIM commands the DIM to control the following via a class 2 message:
^ The horn relay
^ The exterior lights