Noise Cancellation Microphone Replacement (W/U57)

REMOVAL PROCEDURE




1. Remove the overhead console.
2. Disconnect the electrical connector from the noise cancellation microphone (1).
3. Remove the 2 fasteners (2) retaining the microphone (1) to the overhead console.




4. Remove the noise cancellation microphone (1).

INSTALLATION PROCEDURE




1. Install the noise cancellation microphone (1) to the overhead console.




2. Connect the noise cancellation microphone (1) electrical connector.
3. Install the 2 fasteners (2) that retain the microphone to the overhead console.
4. Install the overhead console.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes