With Vent Tube

REMOVAL PROCEDURE


1. Remove the right side sound insulator.
2. Pull back the carpet near the blower motor.





3. Remove the IP compartment.
4. Remove the dash integration module from the bracket.
5. Remove the two rear dash integration module bracket fasteners.
6. Reposition the dash integration module bracket in order to remove the blower motor.





7. Disconnect the electrical connector (1) from the blower motor.
8. Disconnect the blower ventilation tube (2) from the module.





9. Remove the blower motor retaining screws (1).
10. Remove the blower motor from the vehicle.

INSTALLATION PROCEDURE





1. Install the blower motor.
2. Install the blower motor retaining screws (1).

Tighten
Tighten the screw to 1.7 N.m (15 lb in).





3. Connect the electrical connector (1) to the blower motor.
4. Install the blower ventilation tube (2) to the module.
5. Reposition the dash integration module bracket to its original position.
6. Install the 2 rear dash integration module bracket fasteners.
7. Install the IP compartment.
8. Reposition the carpet.
9. Install the right side sound insulator.