Fog Lamp Replacement -Front

REMOVAL PROCEDURE




1. Remove the exterior fastener that secures the fog lamp to the front fascia.
2. Remove the front air deflector.




3. Disconnect the electrical connector from the fog lamp.




4. Remove the remaining fasteners securing the fog lamp to the fascia.
5. Remove the fog lamp assembly.

INSTALLATION PROCEDURE




1. Insert the locating pin into the front fascia.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the inboard fasteners in order to secure the fog lamp to the front fascia.

Tighten
Tighten the fog lamp fasteners to 2 N.m (18 lb in).




3. Connect the fog lamp connector to the fog lamp.




4. Install the remaining fog lamp fastener located on the exterior of the front fascia.

Tighten
Tighten the fog lamp fastener to 2 N.m (18 lb in).

5. Install the front air deflector.