Steering Column Control Module
Steering Column Control Module ReplacementRemoval Procedure
1. Remove the knee bolster.
2. Disconnect the electrical connectors to the steering column module (1).
3. Loosen the steering column control module retaining screw and slide the steering column control module out of retaining bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the steering column control module (1) to the steering column and tighten the retaining screw.
^ Tighten steering column control module retaining screw to 2 Nm (15 inch lbs.).
2. Connect the steering column control module electrical connectors.
3. Install the knee bolster.
4. Program the steering column control module.