Theft Deterrent Control Module

Theft Deterrent Control Module Replacement
Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Disconnect the theft deterrent module electrical connector.
4. Remove the tie straps from the theft deterrent module wiring harness.
5. Remove the theft deterrent module.

Installation Procedure





1. Install the theft deterrent module to the lock module.
2. Connect the theft deterrent module electrical connector.
3. Install new tie straps to secure the wiring harness.
4. Install the steering column trim covers.
5. Enable the SIR system.