Window Track: Service and Repair

Window Run Channel Replacement - Front Door

Removal Procedure

1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .
2. Remove the door module. Refer to Door Control Module Replacement.
3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair.
4. Remove the garnish molding. Refer to Garnish Molding Replacement - Front Door Frame (Garnish Molding Replacement - Front Door Frame) .
5. Remove the window inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Front Side Door Window Belt Inner Sealing Strip Replacement) .




6. Grasp the window run channel at the lower rear corner.
7. Pull up and forward to release the run channel from the door flange.



Installation Procedure





1. Install the front and rear legs of the window run channel through the belt line.
2. Insert the window run channel into the door flange.
3. Seat the run channel at the top corner of the center pillar, ensuring the rear notch in the door flange is aligned with the run channel rubber block.
4. Working forward and down, seat the remaining window run over the flange, ensuring the front notch in the door flange is aligned with the run channel rubber block.
5. Install the window inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Front Side Door Window Belt Inner Sealing Strip Replacement) .
6. Install the garnish molding. Refer to Garnish Molding Replacement - Front Door Frame (Garnish Molding Replacement - Front Door Frame) .
7. Install the water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair.
8. Install the door module. Refer to Door Control Module Replacement.
9. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .