To Close From Open Position

To close the power sunroof glass from the open position is the same as to opening the sunroof glass to the vent position. Press and hold the sunroof switch forward portion. This will apply the sunroof switch low reference circuit to the sunroof switch close signal circuit (ignition voltage reference) input to drop to 0 volts. As long as the sunroof module sees a constant input request from the sunroof switch close signal circuit (0 volts), the sunroof module will control the sunroof motor to slide the sunroof glass to the closed position. The sunroof glass will stop (soft stop) at the closed position based on the input from the limit switch. The sunshade will have to be manually slide closed.